Kit 06 – In-line Galvanised Steel Handrail with swivel fitting to top rail (Any angle)

Description

This Handrail Kit is one of our most flexible and easiest to fit with its swivelling inline fittings to rail and wall. The handrail can be adjusted to any angle. The handrail tube feeds through the swivel fitting at the top of the upright, and into the wall flange that then swivels at the base to suit the wall and handrail angles.
The uprights are secured by selecting the most suitable method from our “Top Fix”, “Side Fix” or “Cast in” solutions. When selecting this method it is essential to add sufficient extra length to dimension A (approx 200mm), to give the desired handrail height. .

What you get with our kits

• A bespoke drawing and instruction guide to your exact requirements
• Fixings to suit your base and substrate choice to secure the handrail kit.
• An Allen key to build the installation

Longer Handrails – If your handrail length ‘B’  is longer than 1.5m, we will automatically calculate & supply additional legs & connectors as required.

Please enter all dimensions in Millimetres. (25.4mm = 1 inch).

Dimension A in mm (1” = 25.4mm) *

Dimension B (Length) in mm *

Floor Fixing Substrate/Material * Please select... Concrete Timber Masonry (Brick/Block)

Wall Fixing Material Please select... Concrete Timber Masonary

Base Type (All bases come with suitable fixings for your chosen substrate) Always add on a minimum of 150mm to dimension A for casting in Suitable for flat areas Suitable for sloping areas 0 to 11 degrees Foot GI246C42 suitable for side fixing to steps or ramps

Calculate

Kit 06 - In-line Galvanised Steel Handrail with swivel fitting to top rail (Any angle) quantity

Add to basket

£15.59