Home » Products » Kit 08 – In-line Galvanised Steel Handrail directly to upright (30 to 60 degrees)

Kit 08 – In-line Galvanised Steel Handrail directly to upright (30 to 60 degrees)

This In-line handrail kit covers most standard step angles at 30 to 60 degrees and with its fixed fitting joining the upright and handrail provides a very solid handrail structure.
The handrail starts directly at the upright which is often used when the look of the handrail is important and where the user is not concerned about need to hold the handrail all the way down. The wall flange is secured by two fixings which are supplied.

The uprights are secured by selecting the most suitable method from our “Top Fix”, “Side Fix” or “Cast in” solutions. When selecting this method it is essential to add sufficient extra length to dimension A (approx 200mm), to give the desired handrail height. .

 What you get with our kits

• A bespoke drawing and instruction guide to your exact requirements
• Fixings to suit your base and substrate choice to secure the handrail kit.
• An Allen key to build the installation

Longer Handrails – If your handrail length ‘B’  is longer than 1.5m, we will automatically calculate & supply additional legs & connectors as required.

Please enter all dimensions in Millimetres. (25.4mm = 1 inch).

Dimension A (Height) in mm *

Dimension B (Length) in mm

Floor Fixing Substrate/MaterialPlease select...ConcreteTimberMasonry (Brick/Block)

Base Type *No Base, always add on a minimum of 150mm to dimension A for casting in

Foot GI132C42 suitable for flat areas, comes with fixings

Foot GI152C42 suitable for sloping areas 0 to 11 degrees, comes with fixings

Foot GI246C42 suitable for side fixing to steps or ramps, comes with fixings

Foot GI144C42

Foot GI145C42

Foot GI146C42

Foot GI242C42

Foot GI251C42

Calculate

Kit 08 - In-line Galvanised Steel Handrail directly to upright (30 to 60 degrees) quantity

Add to basket

£15.59