Home » Products » Kit 01 – Offset Galvanised Steel Handrail – Any angle

Kit 01 – Offset Galvanised Steel Handrail – Any angle

This kit provides a very flexible way to achieve an offset (10cm) handrail to steps & ramps at any angle as well as flat areas.  The handrail is secured to the upright posts from the underside providing a fully smooth top rail.
The uprights are secured to any surface by selecting the most suitable base for your application, or select ‘no base’ if you plan to cast the uprights into concrete, when selecting this method it is essential to add sufficient extra length to dimension A (approx 200mm), to give the desired handrail height. .

What you get with our kits

• A bespoke drawing and instruction guide to your exact requirements
• Fixings to suit your base and substrate choice to secure the handrail kit.
• An Allen key to build the installation

Longer Handrails – If your handrail length ‘B’  is longer than 1.5m, we will automatically calculate & supply additional legs & connectors as required.

Please enter all dimensions in Millimetres. (25.4mm = 1 inch).

Dimension A (Height) in mm *

Dimension B (Length) in mm

Floor Fixing Substrate/MaterialPlease select...ConcreteTimberMasonry (Brick/Block)

Base Type *No Base, always add on a minimum of 150mm to dimension A for casting in

Foot GI132C42 suitable for flat areas, comes with fixings

Foot GI152C42 suitable for sloping areas 0 to 11 degrees, comes with fixings

Foot GI246C42 suitable for side fixing to steps or ramps, comes with fixings

Foot GI144C42

Foot GI145C42

Foot GI146C42

Foot GI242C42

Foot GI251C42

Calculate

Kit 01 - Offset Galvanised Steel Handrail - Any angle quantity

Add to basket

£15.59