Home » Products » Kit 04 – In-line Galvanised Steel Handrail with looped swivel top fittings (Any angle)

Kit 04 – In-line Galvanised Steel Handrail with looped swivel top fittings (Any angle)

This Handrail Kit is one of our most flexible and easiest to fit with its swivelling inline fittings. The handrail can be adjusted to any angle. The handrail is easily adjusted to find the desired position for the user. The handrail tube feeds through the swivel fittings and is then locked into position by simply screwing the Allen key screw onto it.
The uprights are secured by selecting the most suitable method from our “Top Fix”, “Side Fix” or “Cast in” solutions. Where using cast in or top fix it is essential to add the extra length of material you will need above the ground for dimension A (approx 200mm), to give the desired handrail height. .

What you get with our kits

• A bespoke drawing and instruction guide to your exact requirements
• Fixings to suit your base and substrate choice to secure the handrail kit.
• An Allen key to build the installation

Longer Handrails – If your handrail length ‘B’  is longer than 1.5m, we will automatically calculate & supply additional legs & connectors as required.

Please enter all dimensions in Millimetres. (25.4mm = 1 inch).

Dimension A (Height) in mm *

Dimension B (Length) in mm

Floor Fixing Substrate/MaterialPlease select...ConcreteTimberMasonry (Brick/Block)

Base Type *No Base, always add on a minimum of 150mm to dimension A for casting in

Foot GI132C42 suitable for flat areas, comes with fixings

Foot GI152C42 suitable for sloping areas 0 to 11 degrees, comes with fixings

Foot GI246C42 suitable for side fixing to steps or ramps, comes with fixings

Foot GI144C42

Foot GI145C42

Foot GI146C42

Foot GI242C42

Foot GI251C42

Calculate

Kit 04 - In-line Galvanised Steel Handrail with looped swivel top fittings (Any angle) quantity

Add to basket

£15.59